Hold the laminating film with both hands,
pull it underneath the guide roller, center it
and adhere the laminating film to the web.
For any doubt, please refer to
the lamination and media path
drawing.
Push “
On-Off
” button to active the automatic media feeding mood. The green led will be
on.
When both yellow and green leds are flashing it means the system is in error status.
The error occurs when the media roll, lamination roll or both are not loaded, broken or
simply they are run out.
To clear the error it is just necessary to restart the module pushing “
On-Off
” Button.
7
When both LEDs are off, the manual
media feeding is active. It operates
keeping pushed “
Forward Media
”
button.
While using the knob, please adjust the
pressure on the rollers in order for the
laminating film to adhere to the media
and avoid any possible air bubbles.
We recommend the middle hole
position, as show in the picture.