1. Load empty cardboard core(s) and tighten the core holder, then place the motorized
core holder in position.
Cardboard core(s) should not be wider than the width of the fi nished roll
2. Pull the media through the aluminium rollers and attach the labels to the core using a
waste label.
HOW TO LOAD THE REWINDER CORE HOLDER AND SET THE
SLITTER MODULE
11
OPEN
CLOSE
B
C
A
A
B
C
Slitter module has 3 positions:
- Upper position (A), the blades are lifted to allow the media loading;
- Middle position (B), align the blades with the edges and the center of the labels, tighten
the thumb screw once the blade is in position;
- Lower position (C), the blade cut the media.