VIPA CP143 TCP/IP, Manual

Page: 113 / 210

CP143
H1 / TCP/IP manual
Software
Rev. 00/07 5-33
5.9 General test functions
The menu item Test provides access to an extensive set of functions that return information on a
module that is connected in online mode.
You must supply the online parameters before you use this function (Init sub-menu Online). See
also 5.6.2.
5.9.1 Ident
You can use this function to identify the module in online mode. The identification function
displays all important addresses, the serial number and the name of the module in the following
window:
Fig. 5-17: Display window for Ident parameters
The data displayed in this output window can not be modified.
Ident parameters
Station
The name of the respective station. This may be entered and/or modified under Init CP Init.
The name is not displayed if the module has not been loaded with a database. Station names
increase readability and assist with online configurations.
Ethernet address
The ethernet address of the respective station. This may be entered and/or modified under
Init CP Init.
The original ethernet address is displayed if the module has not been loaded with a database.
IP-Adresse
The IP address of the module. This may be entered and/or modified under Init CP Init.
The IP address is calculated from the ethernet address if the module has not been loaded
with a database.