VIPA CP143 TCP/IP, Manual

Page: 55 / 210

CP143
H1 / TCP/IP manual
The CP143 H1 / TCP/IP network board
Rev. 00/07 4-7
4.1.3.2.2 Pin configuration for the D-type socket with PG interface (15-pole)
The 15-pole D-type socket with the screw-type locks is intended for the connection of a
programmer. The following table shows the pin-configuration for the socket:
Pin Signal
1 MEXT (external ground, screen)
2 TTY IN - (current output)
3 -
4 +24V
5 Ground (internal ground)
6 TTY OUT + (current input)
7 TTY OUT - (current output)
8 MEXT (external ground)
9 TTY IN + (current input)
10 24V return
11 20mA current source of the transmitter
12 Ground (internal ground)
13 20mA current source of the receiver
14 Master signal
15 Ground (internal ground)
Tab. 4-2: Pin configuration of the PG interface
4.1.3.2.3 Pin configuration of the TP socket (RJ45)
Pin Signal
1 Tr
2 Transmit -
3 R
4 -
5 -
6 Receive -
7 -
8 -
Tab. 4-3: Configuration of the TP socket (RJ45)