VIPA CP 1413plus, Manual, Page: 61 / 328

CP1413plus manual VIPA CP1413plus network adapter
Rev. 00/07 3-21
3.1.4.2 OS/2 installation
3.1.4.2.1 OS/2 Version A without additional protocols
This installation includes the following components:
- H1 under OS/2 without additional protocols
Step 1
Install the network adapter into your PC (see chapter 3.1.3)
Step 2
Boot into DOS and set any required parameters
Boot OS/2 because the following steps are applicable only to OS/2.
Step 3
Copy all the files from the directories \H1_OS2\MACS, H1_OS2\PROTOCOL,
H1_OS2\TOOLS and H1_OS2\VAR_A of the disk SW83Z 1/2 into the directory
\H1_OS2 on hard disk C:
xcopy a:\h1_os2\MACS c:\h1_os2\
xcopy a:\h1_os2\PROTOCOL c:\h1_os2\
xcopy a:\h1_os2\TOOLS c:\h1_os2\
xcopy a:\h1_os2\VAR_A c:\h1_os2\
Step 4
Add the following lines to your CONFIG.SYS file:
additional lines for C:\CONFIG.SYS
:
:
DEVICE=C:\H1_OS2\PROTMAN.OS2 /I:C:\H1_OS2
DEVICE=C:\H1_OS2\ZX312.OS2
DEVICE=C:\H1_OS2\H1PROT.OS2
RUN=C:\H1_OS2\NETBIND.EXE
:
:
Step 5
Now you must edit the NETADDRESS parameter in the section [H1PROT_NIF] of the
file C:\H1_OS2\PROTOCOL.INI.
Please ensure that the network address is unique!