VIPA CP 1413plus, Manual

Page: 156 / 328

PLC Layer 7 program interface CP1413plus manual
4-50 Rev. 00/07
4.3.3.3 Put connection parameters to standard file
#include <MSGINDEX.H>
#include <S5ACCESS.H>
#include <NETFILE.H>
unsigned short WENTRY_C S5PutConnectionParameter (
S5_VERBINDUNGSDATEN W_POINTER s5data)
Any program that provides a user interface for the configuration of the H1 connection may save the
entered data by means of the
S5PutConnectionParameter
function. This function uses the
same file as previously described for
S5GetConnectionParameter
.
Parameters
s5data
is a pointer to the structure S5_VERBINDUNGSDATEN. All
elements must contain the required values.
Return value
0
OK. The data was entered into the file.
TEXT_NO_MEM
There is not enough memory available for processing
this function.
TEXT_DISK_FULL A g
eneral error occurred when the file was written to
disk.
Note
As this function uses files it is not possible to execute it from within drivers.
See also
S5StartConnection
S5StartConnectionCard
S5StopConnection
S5GetConnectionParameter
S5GetConnectionCard
S5WriteConnectionCard
S5ListConnections