VIPA CP 1413plus Manual Download Page 311

Page: 311 / 328

CP1413plus manual

3COM-PCI-Network Card from VIPA

Rev. 00/07

The window select "Netzwerkkomponententyp" (network component typ) will open. The VIPA-
network-card can be entered here.

To do this select"Netzwerkkarte" and click [Hinzufügen].

Insert the disk"SW88C" (Disk 1/3) und click [Diskette]. Select the disk-drive and click [OK].

The driver list from 3COM will be displayed:

In the manufacturer list select the following card and click [OK]:

"3COM EtherLink XL COMBO (3C900-COMBO)"

or the newer version

"3COM EtherLink XL COMBO (3C900B-COMBO)"

All necessary data will now be transfered to the PC.

Start the PC anew. Do not forget to remove the disk from the drive.

The Network Card is now installed under Windows 95.

Summary of Contents for CP 1413plus









































































































































































































































































































































Search results

Summary of Contents for CP 1413plus

Reviews:

Related manuals for CP 1413plus

Brands by name

Popular brands

VIPA CP 1413plus, Manual

Search results

Summary of Contents for CP 1413plus

Reviews:

Related manuals for CP 1413plus

Brands by name

Popular brands