VIPA CP 1413plus, Manual, Page: 153 / 328

CP1413plus manual Programming
Rev. 00/07 4-47
4.3.3 File functions Layer 7
The following functions refer to the parameter file that is described in the appendix. These functions
may be divided into two groups:
•
File functions that refer to the standard parameter file. This is the
Net.net
file.
•
File functions that refer to a file with a specified name.
File functions for the standard parameter file
The standard parameter file is the file
Net.net
which defaults to the root directory of drive C:.
The name and path of the file may be changed. You can do this as follows:
1. Declare the variable
CONNETFILE
in your system. This variable can then be used to
change the name and the path of the file.
Example: The file is called
H1.net
and it is located in the directory
C:\H1
SET CONNETFILE = C:\H1\H1.net
2. Execute the following function:
Set NetFileName (char * Filename)
File function for a file with a specified name
The file name is supplied to the parameter file together with the function call.