manualshive.com logo in svg

Vintage Revolution PedalPro, Owner'S Manual

Share
Download
Vintage Revolution PedalPro Owner'S Manual Download Page 53

PedalManager Software

53

Rev. 2.0 - EN EU - fw 5.22

11

11.  WORKING WITH PRESETS ON YOUR COMPUTER

PedalPro not only stores 500 presets in its internal memory, it can be connect-
ed to your computer via a USB port and accessed using the PedalManager 
software. 

VR’s PedalManager software is available for Windows™ and Mac OS X, and 
gives you access to advanced preset management options. You can man-
age an unlimited number of presets directly from your computer. Organise, 
reorder, select favourite, re-name, archive, share over the internet, catego-
rise, and upload your presets all via a user-friendly interface. You can also 
store your presets on the USB flash drive bundled with your PedalPro, and 
carry them with you.

You then simply choose the 500 presets and 18 favourite presets you want to 
use, and download them directly onto your PedalPro. 

Using the PedalManager for Windows™ or Mac OS X

The PedalManager software can be found on the USB flash drive that came 
with the unit. It is also available as a free download, together with its up-
grades and new releases, on the 

VR website 

.

• 

To run the PedalManager, copy it into any directory on your computer. 
There is no need to perform any installation and no drivers are needed. 
For your convenience, you might want to create a short-cut on an ac-
cessible location in your computer (eg. the desktop). 

• 

Connect the PedalPro to your computer using the USB cable supplied. 

• 

Start the PedalManager by double-clicking on the programme icon 
found in the directory where you copied the software, or on the short-cut 
you have created.

• 

Turn on the PedalPro. Press the

 

EXIT (USB)

 key [

7

] for two seconds. The 

PedalPro is now in USB Remote Terminal mode. On your computer 
screen, the PedalManager will show that a PedalPro has been detected 
and is connected. You are now ready to start managing your presets via 
the PedalManager.

Please see the PedalManager user manual for a detailed explanation on 
how to use the software and its features. 

Once you’ve finished working with the PedalManager and are ready to exit 
the USB terminal mode, simply switch off the PedalPro.

* Please check the 

VR website 

 

for system requirements and the latest PedalManager release. 

Summary of Contents for PedalPro
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands