Rev. 2.0 - EN EU - fw 5.22
27
TIPS & TRICKS - PHASER
•
When you assign the value 0 to
Depth
, the amount of phase shift de-
pends on the
Manual
level (manual phasing). By adjusting the value of
the
Manual
parameter, you can then:
›
Produce nice distortion tones by combining the manual Phaser
with the Distortion. In the Phaser configuration page, keep the
value of
Depth
to 0 in this combination, and experiment with ap-
plying different values on the
Manual
parameter.
›
Control your phase shift using an expression pedal connected to
the
Pedalino™ Foot Controller.
Set the expression pedal to control
the manual phaser (i.e., assign the
Phas_man
parameter to the
expression pedal*). The manual adjustment of the phase shift in
real time will produce interesting sounds in stereo configuration.
•
To produce a classic vintage phaser effect, assign the value 0 to
Manual
. The effect will also vary according to the
Depth
settings and
the modulating waveform (
Wv
) you have selected.
•
To produce a medium/fast phaser - e.g., with a
Tempo
greater than
120 BPM - and with a low depth (less than 60%), use a combination of
Manual
level and
Depth
. The Phaser will produce time varying phase
shift, according to the
Depth
and the
Manual
settings. When working
using this configuration, set the level of
Depth
to between 30 and 60
and adjust the
Manual
level according to the effect you want to cre-
ate.
•
Which waveform (
Wv
) form should you use? It depends on the effect
you want to create. For a shimmering, slow-sweeping deep phaser,
use ‘pcal’ (linear phase sweep) or ‘trig’ (triangle), setting the parame-
ter
Tempo
to a low value. For a Leslie effect (vibrato), use ‘sine’ and a
level of
Tempo
greater than 170. For an arpeggiator, use a ‘shlf’ (shelf)
or ‘rect’ (Rectangle) and moderate
Tempo
.
•
The parameter
Ph
(phase of the modulating waveform) does not pro-
duce any effect if you are using the Phaser on its own. For use of the
Phaser in combination with any other modulators (tremolo, panner,
auto filters, etc) refer to the QUICK TIP box ‘
Phase of the modulating
waveforms
’.
9
Working with Effects: Phaser
*For more information, please download the Pedalino Owner’s Manual from
VR website
.
