Rev. 2.0 - EN EU - fw 5.22
36
9.3.8 Volume Controls
PedalPro™ has stereo, channel-independent Volume Controls (also known
as Expression Controls or Level Controls) that give you tight, precise control of
what goes into your amplifiers.
PARAMETERS
•
To enter the Volume configuration page, press the
multifunction key
[
10c
] labelled ‘
Levl
’ on
page 2
of the main menu.
È1/1
0
4
: 0
e
L v
e
Ç Á
.
LvR 069 . 0
l
0
:
LvL
c
_ nt
Level_cnt
– Volume controls effect switch. Range: on (
Á
), off (
Â
)
•
To enable (
Á
) or disable (
Â
) the analogue Volume Controls for the left
and right channel in your effect chain, press the
BYPASS EFFECT 2
key
[
10c
].
LvL
– Volume control, left channel. Range: 0-100%
This parameter controls the total output level on the left channel.
•
To change the total output level of PedalPro’s left channel, press
EDIT
[
5
].
Use the
arrow keys
[
3
] to position the blinking cursor next to LvL. Adjust
the value with the
selection dial
[
4
].
LvR
– Volume control, right channel. Range: 0-100%
This parameter controls the total output level on the right channel.
•
To change the total output level of PedalPro’s right left channel, press
EDIT
[
5
]. Use the
arrow keys
[
3
] to position the blinking cursor next to LvR.
Adjust the value with the
selection dial
[
4
].
9
Working with Effects: Volume Controls
QUICK TIP:
By assigning one of ADES parameters Volume#0 to Volume#3
(see
Expression parameter table
) to an expression pedal connected to
the
Pedalino™ Foot Controller*
, you can adjust the stereo volume level of
your sound while you play.
*Pedalino™ Foot Controller required. Pedalino is included when purchasing a PedalPro System.
