Rev. 2.0 - EN EU - fw 5.22
33
PAGE 4/6 - AUTO MODE MODULATION SETTINGS FOR F2
This page is used to configure filter F2 when auto mode is selected for F2
(
F2Md
set to auto on page
2/6
).
Tempo: 1 0 .
Ph:
0
0
0
Ì
0 0
È4/6
W v
a
ec
e
:
2 r
t
F i n
m
[ Hz
0
:
2
]
0
5
1
F ax
m
[ Hz
1
:
1
]
0
0
3
F
WaveF2
– Filter F2 modulating waveform. Range: sine, trig, trap, rect, expo,
shl1, shl2, shl3.
This is the waveform assigned to the individual modulator of each filter. You
can choose from among the following possibilities (see
Appendix A
, on page
62, for more details on the modulating waveforms):
1. sine
= sinusoidal
2. trig
= triangle
3. trap
= trapezoidal
4. rect
= symmetric square waveform
5. expo
= exponential
6. shl1
= shelf waveform 1
7. shl2
= shelf waveform 2
8. shl3
= shelf waveform 3
•
To change or select a modulating waveform for F2, press
EDIT
[
5
]. Use the
arrow keys
[
3
] to position the blinking cursor next to WaveF2. Adjust the
value with the
selection dial
[
4
].
Tempo
– Speed of the F2 modulator. Range 3 BPM (20 s) - 550 BPM (9.16 Hz)
•
To change the Tempo of the F2 modulating waveform, press
EDIT
[
5
]. Use
the
arrow keys
[
3
] to position the blinking cursor next to Tempo. Adjust
the value with the
selection dial
[
4
].
Ph
– Phase of the F2 modulator. Range: 0°, 90°, 180°, 270°
Parameter Ph controls the phase of the modulating waveform. It is used to
control the relative phase of effects such as the Tremolo/Panner, Phaser, Fil-
ters (in auto mode), and Chorus, when used simultaneously. (For more details
refer to the QUICK TIP box ‘
Phase of the modulating waveforms
’, on page 25).
•
To alter the phase of the F2 modulator, press
EDIT
[
5
]. Use the
arrow keys
[
3
] to position the blinking cursor next to Ph. Adjust the value with the
selection dial
[
4
].
Fmin2
– F2 minimum frequency. Range: 150 Hz to 2697 Hz
Fmax2
– F2 maximum frequency. Range: 370 Hz to 2697 Hz
These values define the frequency range swept by filter F2 in auto mode
•
To change the value of Fmin2 or Fmax2, press
EDIT
[
5
]. Use the
arrow keys
[
3
] to position the blinking cursor next to Fmin2 or Fmax2. Adjust the value
with the
selection dial
[
4
].
Please note: PedalPro will NOT allow you to set Fmax2 smaller than
Fmin2.
PAGE 5/6 - ENVELOPE MODE MODULATION SETTINGS FOR F1 AND F2
This page is used to configure Filters F1 and F2 when in envelope mode (
F1Md
and/or
F2Md
set to env+ or env- on
page 2/6
).
Sens1 : 02 .
Fx:
n
i
l
r
0 0
È5/6
F t
s
z]
r [
1 H
:
F tr
s
[ Hz
0
:
2
]
0
5
1
S ns
e
: 07
6
.
2
5
0370
Fx:
p
x
e
+
Fstr1[Hz]
– Start frequency, filter F1. Range: 370 Hz to 1968 Hz
Sets the start frequency of the modulator sweep of filter F1 in envelope mode
•
To change the value of the starting frequency of the modulator of F1,
press
EDIT
[
5
]. Use the
arrow keys
[
3
] to position the blinking cursor next to
Fstr1. Adjust the value with the
selection dial
[
4
].
Sens1
– Sensitivity of filter F1. Range: 0-100%
This parameter defines how much the force you put into your strumming ac-
tion will affect the displacement of filter F1.
9
Working with Effects: Filters
