36
each channel manualy. To store entered data, press „SET“ key (see ).
Pic 25
Manual calibration of Analog Inputs
7.3
Discrete measurements [Discrete inputs]
Performed functions:
•
Tracking of discrete signal status;
•
Filtering from discrete signal fluctuations;
•
Discrete signals changes storaging in archives;
•
“Alarm” status (as events) fixation;
•
Impulse aggregations and storing in archives.
Configurable parameters:
•
D In channel usage;
•
Debounce filtering time;
•
Impulse counting mode;
•
Impulse multipier (just to view multipliered impulse quantity, this parameter will not
effect to Archive stored value);
•
“Alarm” state (None (disabled), Input open, Input closed or in both cases);
•
Archive state (None (disabled), Input open, Input closed or in both cases).
Current discrete channel’s states are shown by corresponding pictures Open and Close (see
). Using check box, up to the “Current state” pictures, you can Enable or Disable discrete
channels. Discrete signal meanings are filtered by user-defined debounce times (debounce time
Summary of Contents for MX-7
