Villager VCSB 12 S, Original Instruction Manual

Page: 18 / 149

3
Villager VCSB 12 S (GB)
Intended use
The charger Villager VCSB 12 S is intended for charging 6/12V d.c. acid-
lead/AGM/GEL batteries (only rechargeable, maintenance-free, closed batteries,
lead-acid batteries (SLA)) as installed in cars, boats, lorries and other vehicles,
and can not be used to charge non-rechargeable, Ni-Cd or other types of
batteries.
This including different types of lead-acid batteries such as:

Wet batteries/closed lead batteries (liquid electrolyte)

Maintenance-free batteries and VRLA batteries (valve regulated lead-acid
batteries)

AGM/GEL type batteries
Do not use it for any other purpose.
The charger can be directly connected to the batteries using the clamps.
The charger is not intended for charging battery types not listed above.
The charger is solely approved private use . Any other use or modification of the
charger is considered inappropriate and involve substantial hazards. The
manufacture assumes no liability for damages arising from improper use
.
Warning!
Familiaries yourself with all charger functions and learn how to corrrectly use the
device before first using it. For this perpose, please carefully read the following
operating instructions. Store this manual in a safe lacation. When passing the
charger on to other, be sure to also include all documentation.
Contents:
Please check the contents immediately after opening the package. Check the
charger and all parts for damage. Do not operate a defective charger or parts.

1 pc charger

1 pc operating manual