![Viking Designer Topaz User Manual Download Page 70](http://html1.mh-extra.com/html/viking/designer-topaz/designer-topaz_user-manual_1025558070.webp)
70
Taking Care of the Machine
Bobbin alarm does not work?
• Clean lint from bobbin area.
• Use only original HUSQVARNA VIKING® bobbins
approved for this model.
Thread cutter does not cut?
(Only on model 30)
• Remove stitch plate and clean lint from bobbin area.
• Make sure Selective Thread Cutter Auto is turned on in the
SET Menu.
Wrong Stitch, Irregular or Narrow Stitches?
• Cancel twin needle or stitch width safety in the SET Menu.
• Turn machine off and on to reset.
• Change needle, rethread top and bobbin threads.
• Use
stabilizer.
Machine Sews Slowly?
• Check
speed.
• Remove stitch plate and brush lint from bobbin and teeth
area.
• Have your sewing machine serviced at your authorized
HUSQVARNA VIKING® dealer.
Machine Will Not Sew?
• On model 20: put bobbin winder to the left into sewing
position.
• On model 30: put bobbin winder lever to the right into sewing
position.
• Check plugs are securely plugged all the way into the machine.
• Check wall plug and power to wall plug.
• Check foot control connection.
Embroidery puckers?
• Use correct stabilizer - see Accessory User’s Guide.
• Hoop fabric tightly as described on page 57.
Thread loops are forming on the underside of
the embroidery design?
• Has the embroidery built up too much to move freely under
the embroidery foot? Increase the pivot height in the Settings
menu in small steps until problem is solved.
Machine will not embroider?
• Push embroidery unit
À
rmly into machine socket.
• Slide on the correct hoop.
The sewing and embroidery machine
function buttons do not respond to touch?
• The sockets and function buttons on the machine can be
sensitive to static electricity. If the function buttons do not
respond to touch, turn the machine off and then on again. If
the problem persists, contact your authorized HUSQVARNA
VIKING® dealer.
Have your sewing machine serviced regularly
by your authorized HUSQVARNA VIKING®
Dealer!
If you have followed this trouble shooting information and
still have sewing problems, take the sewing machine to your
authorized HUSQVARNA VIKING® dealer. If there is a
speci
À
c problem, it is a great help to test sew with your thread
on a scrap of your sewing fabric and bring it to your authorized
HUSQVARNA VIKING® dealer. A sewing sample will often
give much better information than words.
Non-Original Parts and Accessories
The warranty does not cover any defect or damage caused by use
of non-original accessories or parts.