Machine SET Menu, Sewing Mode
30
Set Up
Buttonhole Balance
(Only in Sewing Mode)
If the Sensor One-Step Buttonhole Foot is not connected or if
you select stitch 1:25, the columns in the buttonhole stitch will
be sewn in different directions. On some fabrics this may cause
the columns to appear with different density. Use the left/right
buttons to balance the density between -7 and 7. The changes
only affect the selected stitch. If another stitch is selected or the
same stitch is selected again, the value is reset to the default value.
Automatic Jump Stitch Trim
(Only in Embroidery
Mode on model 30)
Model 30 features the Automatic Jump Stitch Trim. This function
saves you time trimming after the embroidery is completed. Use
the OK button to turn on or off the function. The default setting
is on. As you embroider, your machine will trim the top jump
stitch thread and pull the thread end to the underside of the
fabric.
Note: The machine will also cut the thread after you have changed to a new
color. Hold the thread end when you start embroidering again, so that you can
easily remove the thread end when cut.
Not all designs are programmed for Automatic Jump Stitch Trim.
Jump stitch trim commands can be added to any design using the
5D™ Software.
Some embroidery designs you purchase may have trim
commands in them. To check if a design includes trim
commands you can open the design in 5D™ Stitch
Editor and look for the trim command symbol.
Note: If the front and back of your embroidery will be visible, turn off the
Automatic Jump Stitch Trim and cut the threads manually.
My Hoops
(Only in Embroidery Mode)
Use the right arrow button to open a menu where you can set the
hoops you own. Use the OK button to select or deselect a hoop.
When you load a design your machine will automatically select
the smallest hoop size that
À
ts the design among the hoops that
you have set. If none or all hoops are selected in the My Hoops
list you will be able to select from all hoops in Embroidery Mode.
Press the left arrow button to return to the SET Menu.
Machine SET Menu, Embroidery Mode
My Hoops Selections Menu
