63
Embroidery Mode
5
Hoop options
Press the Hoop Options button to open a list of Hoop options.
Use the up/down arrow buttons to make a selection and con
À
rm
by pressing the OK button. Close the Hoop Options Menu
by pressing the Hoop Options button once more or select the
Current Stitch position.
Hoop size
When a design is loaded to the embroidery
À
eld the smallest hoop
that
À
ts the design is automatically selected.
Use the right arrow button to open a list of available hoop
sizes, including hoops that are available to purchase from your
authorized dealer. Depending on the size of the design, some
hoops may not be available for selection.
If you have set the hoops that you own in the My Hoops list in
the SET Menu your machine will select the most suitable hoop
among the hoops that you have set. Only the hoops that you have
set will be available in the Hoop list, see page 30.
Use the up and down arrow buttons to select a different hoop
and con
À
rm your selection by pressing the OK button.
Note: If you start embroidering and the hoop you have selected is not the
same as the hoop attached to the embroidery unit, a pop-up message will
appear to inform you of this. Attach the correct hoop or select another hoop
in the list.
Current Stitch
If you have selected one of the hoop positions and want to
return to the current stitch and start embroidering where the
embroidery was interrupted, select Current Stitch. You can also
press the Start/Stop button once to return to current stitch and
start to embroider.
Park Position
When you have
À
nished your embroidery, remove the hoop and
select Park Position. The embroidery arm will be placed in a
position that will allow easy storage.
Note: It is very important that the hoop is removed, otherwise the hoop, needle
or presser foot may be damaged.
Bobbin Position
To make it easier to change the bobbin, select Bobbin Position.
The hoop will move away from you, allowing you to open the
bobbin cover and replace the bobbin.
Trim Position
Trim Position will move the hoop towards you, making it easier to
cut jump stitches and trim fabric.
Center Position
Use the Center Position if you want to check where the Center
Position of the hoop will be placed on the fabric.
