40
Lower Double Oven
The Door Switch for the lower double oven is
located between the upper and lower oven
cavities. It is used to sense when the lower oven
door is open.
WARNING:
Disconnect power to oven
before servicing. Follow lockout/tagout
procedures.
CAUTION:
Some areas of the oven
interior are sharp; wear protective gloves to
avoid injury.
Condition Requirements:
Oven Partially Removed
1.
Remove two screws and the lower door
latch access panel.
2.
Remove one screw from the door switch
and slide the door switch actuator out of
the guide.
3.
Disconnect two connectors from the door
switch.
4.
Reverse procedure for installation.
Oven Lights Transformer
The Oven Lights Transformer is located above the
oven cavity in the rear of the component
compartment. It is used to reduce the 240 volt
supply power to 12 volts for the oven lights.
WARNING:
Disconnect power to oven
before servicing. Follow lockout/tagout
procedures.
CAUTION:
Some areas of the oven
interior are sharp; wear protective gloves to
avoid injury.
Condition Requirements:
Full Access to Control Components
1.
Disconnect two connectors from the blue
wires of the transformer.
2.
Disconnect two connectors from the black
wires of the transformer.
3.
Remove two screws and the transformer
from the oven.
4.
Reverse procedure for installation.
Summary of Contents for Designer DEDO530SS
Page 18: ...18 Service Procedures Part Locator...
Page 50: ...50 Oven Control Board Oven Control Board Connections...
Page 68: ...68...