Viking Designer DEDO530SS, Service Notebook

Page: 14 / 68

14
Setting the Automatic Start Time Bake
Program
The Bake Time and Start Time modes of the timer
can be used to automatically turn the oven on and
off at a preselected time.
SET
CLOCK/
PROBE
MIN/SEC
TIMER
SET
BAKE
TIME
START
TIME
To set the Automatic Time Bake Program:
1. Set the start time:
For Single Ovens – Program the start
time by pressing the “START TIME”
button and turning the “SET” knob
until the desired start time is
displayed. This is the time of day you
want the food to begin cooking.
For Double Ovens – Press the
“START TIME” button once to set
the starting time for the upper oven
(UPPER OVEN will show on the
display). Press the “START TIME”
button twice to set the starting time
for the lower oven (LOWER OVEN
will show on the display). Then,
program the start time by turning the
“SET” knob until the desired start
time is displayed. This is the time of
day you want the food to begin
cooking.
2. Set the desired baking time:
Once the start time is set, the display
will switch to :00 and the words SET,
COOK, and TIME will appear on the
right side of the display. You will now
enter the desired baking time. Turn
the “SET” knob until the desired
baking time is displayed in hours and
minutes. Once the desired bake time
is set, the word SET will disappear
and the word DELAY will appear in
the display indicating that the Bake
Time program has been set.
NOTE
For Double Ovens, the word DELAY will show
with either UPPER OVEN or LOWER OVEN,
depending on which oven has been selected.
3. Set the Oven Function selector to the
desired function –BAKE, CONVECTION
BAKE, OR TRUCONVEC, etc.
4. Set the temperature control knob to the
desired baking temperature. The
automatic time bake program is now set.
NOTE
The display will continue to show the amount of
bake time that was programmed (this will remain
until the programmed start time is reached). You
can return the display to clock mode by pressing
the “CLOCK/PROBE” button – Notice that a
small clock will be displayed in the upper right
corner to indicate that a program is in progress.
Switch back to the timer mode by pressing the
“BAKE TIME” button.
5. When the specified time is reached, the
oven will automatically turn on. It will
bake for the programmed amount of time
at the selected temperature.
NOTE
Setting the remaining duration time to :00 will
cancel the Automatic Bake program. At one
minute from the end of the specified bake
program, the oven timer will beep once. At the
end of the specified bake program, the oven will
automatically turn off and the timer will sound a
series of three beeps.
6. Press the “START TIME” button to end
the program. The display will then return
to displaying the time.
7. Turn the temperature control knob and
oven function selector to off.