32
Oven Function Selector Removal
The Oven Function Selector is located on the
control panel. It is used to select the oven function
(i.e., Bake, Broil, and TruConvec, etc). It is a
potentiometer and has a black cover on the rear to
distinguish it from the thermostat which has a red
cover.
WARNING:
Disconnect power to oven
before servicing. Follow lockout/tagout
procedures.
CAUTION:
Some areas of the oven
interior are sharp; wear protective gloves to
avoid injury.
Condition Requirements:
Partial Access to Control Components
1.
With the knob in the off position, remove
the knob from the oven function selector.
2.
Remove two screws, bezel, and the oven
function selector from the control panel.
3.
Disconnect connector from the oven
function selector.
4.
Reverse procedure for installation.
Oven Thermostat Removal
The Oven Thermostat is located on the control
panel. It is used to set the oven temperature. It is a
potentiometer and has a red cover on the rear to
distinguish it from the oven function selector
which has a black cover.
WARNING:
Disconnect power to oven
before servicing. Follow lockout/tagout
procedures.
CAUTION:
Some areas of the oven
interior are sharp; wear protective gloves to
avoid injury.
Condition Requirements:
Partial Access to Control Components
1.
With the knob in the off position, remove
the knob from the thermostat.
2.
Remove two screws, bezel, and the
thermostat from the control panel.
3.
Disconnect connector from the thermostat.
4.
Reverse procedure for installation.
Summary of Contents for Designer DEDO530SS
Page 18: ...18 Service Procedures Part Locator...
Page 50: ...50 Oven Control Board Oven Control Board Connections...
Page 68: ...68...