38
Door Latch Assembly Removal
Single Oven and Upper Double Oven
The Door Latch Assembly for the single oven and
upper double oven is located above the oven
cavity in the front of the component compartment.
It is used as a safety device during the self-clean
cycle.
WARNING:
Disconnect power to oven
before servicing. Follow lockout/tagout
procedures.
CAUTION:
Some areas of the oven
interior are sharp; wear protective gloves to
avoid injury.
Condition Requirements:
Partial Access to Control Components
1.
Remove four screws and upper door latch
access panel.
2.
Remove two 1/4 hex screws from the door
latch assembly.
3.
Disconnect six connectors from the door
latch assembly.
4.
Reverse procedure for installation.
Lower Double Oven
The Door Latch Assembly for the lower double
oven is located between the upper and lower oven
cavities. It is used as a safety device during the
self-clean cycle.
WARNING:
Disconnect power to oven
before servicing. Follow lockout/tagout
procedures.
CAUTION:
Some areas of the oven
interior are sharp; wear protective gloves to
avoid injury.
Condition Requirements:
Door Assembly Removed
1.
Remove two screws and the lower door
latch access panel.
2.
Remove two 1/4 hex screws from the door
latch assembly.
3.
Disconnect six connectors from the door
latch assembly.
4.
Reverse procedure for installation.
Summary of Contents for Designer DEDO530SS
Page 18: ...18 Service Procedures Part Locator...
Page 50: ...50 Oven Control Board Oven Control Board Connections...
Page 68: ...68...