![Viking Designer DEDO530SS Service Notebook Download Page 33](http://html1.mh-extra.com/html/viking/designer-dedo530ss/designer-dedo530ss_service-notebook_1023511033.webp)
33
Oven Control Board Removal
The Oven Control Board is located above the oven
cavity in the front of the component compartment.
It is used to control all oven functions. Double
ovens have two control boards, one for each oven.
The upper oven control board is on the left and the
lower oven control board is on the right.
WARNING:
Disconnect power to oven
before servicing. Follow lockout/tagout
procedures.
CAUTION:
Some areas of the oven
interior are sharp; wear protective gloves to
avoid injury.
Condition Requirements:
Partial Access to Control Components
1.
Disconnect all connectors from the control
board.
2.
Remove six screws and the control board
from the oven
3.
Reverse procedure for installation.
Oven Light Switch Removal
The Oven Light Switch is located on the control
panel. It is used to turn the oven lights on or off.
WARNING:
Disconnect power to oven
before servicing. Follow lockout/tagout
procedures.
CAUTION:
Some areas of the oven
interior are sharp; wear protective gloves to
avoid injury.
Condition Requirements:
Partial Access to Control Components
1.
Pull to remove the button from the switch.
2.
Remove the knurled nut and the light
switch from the control panel.
3.
Disconnect the light switch wires at the
connectors.
4.
Reverse procedure for installation.
Summary of Contents for Designer DEDO530SS
Page 18: ...18 Service Procedures Part Locator...
Page 50: ...50 Oven Control Board Oven Control Board Connections...
Page 68: ...68...