![Viking Designer DEDO530SS Service Notebook Download Page 21](http://html1.mh-extra.com/html/viking/designer-dedo530ss/designer-dedo530ss_service-notebook_1023511021.webp)
21
Door Assembly Removal
CAUTION:
Use care when handling the door
assembly. Do not lift or carry the door by the
handle.
Condition Requirements:
Door Lowered
1.
Place pin in pin hole.
2.
Remove screw and hinge trim from oven.
3.
Close door until pins stop door.
4.
Lift door up and out.
NOTE
To adjust the door, turn the adjustment screw
clockwise to raise the door or turn it
counterclockwise to lower the door. The oven
must be partially removed to adjust the door.
5.
Reverse procedure for installation.
Door Gasket Removal
Condition Requirements:
Door Lowered
1.
Insert a narrow tool or small flat-blade
screwdriver into the center of each clip
and pry upward.
2.
Remove the door gasket from two holes in
the bottom of the door liner.
3.
Reverse procedure for installation.
Summary of Contents for Designer DEDO530SS
Page 18: ...18 Service Procedures Part Locator...
Page 50: ...50 Oven Control Board Oven Control Board Connections...
Page 68: ...68...