0478 131 9937 B - EN
172
Divided mowing area – the robotic mower
cannot travel independently from one
mowing area to the other.
Docking zone
:
Location (1) directly next to the houses
A
No-go areas
:
Installation of the perimeter wire (2)
around the free-standing tree and around
the vegetable patch
B
based on a linking
section installed at right angles to the
edge.
Wire clearances
:
Clearance to obstacles that can be
travelled on such as patios and paths:
0 cm
Clearance to high obstacles:
27 cm
Clearance to the tree:
37 cm
Minimum wire clearance in the confined
areas behind the vegetable patch:
54 cm
Secondary area
:
Installation of a secondary area
C
; linking
section (3) on the patio accommodated in
a cable duct.
Programming
:
Define the size of the mowing area
(without secondary area), program one
starting point (4) in the confined area –
starting frequency 2 of 10 operations
(
Particularities
:
Bring the robotic mower to the secondary
area several times per week and activate
the command "Start mowing". (
Take the mowing performance into
If necessary, install two separate mowing
areas.
