131
DE
FR
NL
IT
EN
0478 131 9937 B - EN
Move the bar further
to the
right
for mowing at a lower
humidity. If the bar is moved
all the way to the right, the
robotic mower will only mow if
the rain sensor is completely dry.
2 Time:
Set the current time.
The set time must correspond to the
actual time in order to prevent inadvertent
mowing by the robotic mower.
3 Date:
Set the current date.
The set date must correspond to the
actual calendar date in order to prevent
inadvertent operation of the robotic
mower.
4 Track offset:
The robotic mower travels along the
perimeter wire at a 6 cm offset from
the wire as standard. With this offset,
optimum docking is ensured.
●
Only if necessary, open the selection
window with OK and set the required
value (3 cm to 9 cm).
5 Language:
Set the required display language.
The language selected during initial
installation is set as the default.
11.8 TeaM installation
1
Passage
2
ASM (anti-stuck manoeuvre)
3
New installation
4
Starting points
5
Edge testing
1 Passage:
Switch offset drive home on and off.
When the passage is activated, the robotic
mower travels back home to the docking
station, offset at a distance, along the
perimeter wire.
Three versions
can be selected:
Off
– Default setting
The robotic mower travels along the
perimeter wire.
Narrow
–
40 cm
The robotic mower alternatively travels
along the perimeter wire or offset by
40 cm.
Wide
–
40 - 80 cm
The distance to the perimeter wire is
selected randomly within this passage
during each drive home.
2 ASM (anti-stuck manoeuvre):
When ASM is switched on, the robotic
mower starts an evasive routine if it gets
stuck.
On
– Default setting
Off
– ASM should be switched off
– if the mowing area contains larger level
surfaces (e.g. asphalted drives),
– if the robotic mower often turns 90°
unexpectedly during the work,
– if the robotic mower remains stationary
with the message 1131 without getting
stuck during the work.
3 New installation:
The installation assistant is started
again, the existing mowing plan and
all settings for all machines grouped as an
iMow TeaM are deleted. (
4 Starting points:
The robotic mower either starts the
mowing at the docking station where
the machine was charged (default setting)
or at a starting point.
Starting points are to be defined
– if partial areas are to be travelled to in a
targeted manner because they are
insufficiently mowed,
– if areas can only be accessed via a
corridor. At least one starting point must
be defined in these partial areas.
To set, either
●
learn starting points
or
●
select the required starting point and
define it manually.
Learning starting points
:
The time can also be set using the
iMow app. (
The date can also be set using the
iMow app. (
Recommendation:
The standard setting of 6 cm should
not be changed.
If offset drive home (passage) is to
be used,
guide loops
must be
installed. (
Staggered drive home can only be
activated when the perimeter wire
has been routed with a clearance of
at least 2 m at the narrowest
sections.
Perform learning of the starting
points with one machine.
Make sure that all docking stations
are freely travellable.
