117
DE
FR
NL
IT
EN
0478 131 9937 B - EN
Fasten the perimeter wire (1) to the ground
on the
left
or
right
as appropriate, next to
the floor plate, directly next to a wire outlet,
using a fixing pin (2).
Provide a free wire end (1) with a length of
approx. 1.5 m.
Installing a mowing area:
On side (A) of the master docking station
(1), route the perimeter wire (2) in a
straight line with a minimum clearance
C
and at a right angle to the floor plate.
On side (B) of the master docking station
(1), route the perimeter wire (2) in a
straight line with a minimum clearance
D
and at a right angle to the floor plate.
Then follow the edge of the mowing area
with the perimeter wire.
Minimum distance
C
: 1 m
Minimum distance
D
: 3 m
Route the perimeter wire (1) around the
mowing area and around any obstacles
(
12.6) and fasten it to the ground using
fixing pins (2).
A greater wire clearance must be
maintained at the corners around high
obstacles such as wall corners or high
flowerbeds
X
to prevent the robotic
mower from scraping against the obstacle.
Route the perimeter wire (1) in compliance
with the given clearances.
A
= 27 cm
B
= 10 cm
Avoid routing at acute angles (less than
90°). In acutely angled lawn corners,
fasten the perimeter wire (1) to the ground
with fixing pins (2) as illustrated.
If offset drive home (passage) is
used, the perimeter wire must be
routed at least
1.5 m
on both sides
of the master docking station in a
straight line and at right angles to
the floor plate. (
