str
38
Button
Function
On/Off button
To switch the device on and off.When you switch the device on,the pre- set param
-
eters drying time (10hous) and drying temperature (45°C) are displayed.
The device can be switched off using this button at any time,even when drying.
Start/Pause button
This button starts/pauses the drying process at the drying time and temperature
displayed/selected.
The hot air symbol is shown on the display.
Once the drying time set has finished (timer shows 00:00), the heating and hot air
fan are automatically switched off and the unit beeps 5 times (can also be muted,
-
See “beeper”).
If you press the
Start/Pause
button during the drying process,e.g. to adjust the
drying racks,the drying process is interrupted,i.e. the heating and warm air are
switched off,the display shows the remaining time and the hot air symbol flashes.
Press the
Start/Pause
button again to continue the drying process.
Set Button
SUse this button to set the drying time and temperature you want.
If you press the Set button,the time display flashes and can be adjusted using the
rotary knob(1 to 24 hours in 30 minute increments).Press the
SET
button again and
the temperature display flashes.Now use the rotary knob to set the temperature
you want. (35 to 70°C in 5°C increments).
You can change the parameters at any time during the drying process.
Mute beeper
Press and hold the
SET
button for more than 3 seconds to activate mute mode.The
device will not beep at the end of the drying process. This is handy if you wish to
dry overnight.The setting is saved until you press the
SET
button again for longer
than 3 seconds and the mute symbol disappears.
USE OF DEHYDRATOR