Safety
VITOBLOC 200 EM-530/660
version
SCR
Operating instructions
13
58
4
1
4
3
5
GB
3.7.8 Electrical energy/equipment
DANGER
Live components!
Death by electrocution on contact
► Only trained, authorised, specialist
personnel may perform work on the
machine.
► Observe the safety instructions
listed in the machine.
► Isolate the machine from its power
supply before commencing
electrical work.
► Five safety rules specified in
standard series DIN VDE 0105
must be observed!
DANGER
Incorrect fuses!
Increased risk of fire due to
incorrect or incorrectly installed
fuses
► Insert fuses without using any
force. Position the fuse correctly.
► Only use structurally identical types
with the specified response
characteristics.
PLEASE NOTE
Installation or repair work performed
incorrectly!
Serious material damage to the
machine and its surroundings
► Only have service and repair work
carried out by authorised technical
personnel.
► Only use the original components
permitted by the manufacturer.
► Observe all safety instructions and
hazard warnings.
●
Only equip and operate the machine with products
permitted by the manufacturer.
●
Only use original fuses/MCBs with the prescribed
current strengths! Shut down the machine
immediately in the event of faults in the power
supply!
●
Observe all safety instructions and hazard
warnings on the electrical equipment!
●
Installation work on electrical equipment or
operating materials may only be carried out by a
qualified electrician or trained personnel under the
supervision and guidance of an electrician, in
accordance with the electrical regulations.
●
All work on live parts is prohibited!
