Viessmann BW 301.B06, Installation And Service Instructions Manual

Page: 19 / 132

19
Transport
!
Please note
Impacts, compression and tensile loads can
cause damage to the outside panels of the
appliance.
Never put weight on the top, front or side panels
of the appliance.
!
Please note
Tilting the compressor at a steep angle inside
the heat pump can result in appliance damage.
Max. tilting angle: 45° for a very short time
Installation room requirements
!
Please note
Unfavourable ambient conditions can lead to
malfunctions and appliance damage.
The installation room must be dry and free from
the risk of frost:
■ Ensure ambient temperatures between 0 and
35 °C.
■ Max. 70 % relative humidity (corresponds to
an absolute humidity of approx. 25 g water
vapour/kg dry air)
Danger
Dust, gases and vapours can be damaging to
health and trigger explosions.
Avoid dust, gases and vapours in the installation
room.
!
Please note
Overloading the floor can result in damage to
the building structure.
Observe the permissible floor load. Take the
total weight of the appliance into account.
Total weight
Type Weight in kg
BW 301.B06 113
301.B08 117
301.B10 129
301.B13 135
301.B17 148
Type Weight in kg
BWC 301.B06 123
301.B08 127
301.B10 139
301.B13 145
301.B17 158
Type Weight in kg
BWS 301.B06 109
301.B08 113
301.B10 125
301.B13 131
301.B17 144
To prevent the transmission of structure-borne noise,
never site the appliance above ceilings with wooden
joists, e.g. in the attic.
Minimum room volume (to EN 378)
Type Refrigerant
charge in kg Minimum
room volume
in m
3
■
BW
■
BWC
■
BWS
301.B06 1.40 3.2
301.B08 1.95 4.4
301.B10 2.40 5.5
301.B13 2.25 5.1
301.B17 2.75 6.3
Preparing for installation
Siting and transport requirements
5516461
Installation