86
Ethernet communication
16:48:48
06/08/2013
Back
Home page
The Ethernet settings apply to the webserver, Modbus UDP and Modbus TCP.
Please note: Once the Ethernet address has been changed, the display does not connect to the
controller if the display is connected via Ethernet. Enter the controller's new IP address
in the display setup for the display to function again. Procedure: Tap the display in a
blank area of the screen until the setup menu appears. Select Web Connection, select Remote host
IP, enter a new IP and select OK. At the top left, tap Back twice and then select Save
.
Save and back
Subnet mask
IP address
Default router
Ethernet controller settings
192
!!!CAUTION!!! First
read the above information!
168
0
1
.
.
.
255
0
0
0
.
.
.
0
0
0
0
.
.
.
Commissioning, inspection, maintenance
Further details regarding the individual steps
(cont.)
5848 246 GB
