39
400 V~
230 V~
<42 V
1.
Route LV leads through the "< 42 V"
opening to the heat pump wiring
chamber.
2.
Route 230 V cables through the
"230 V" opening to the heat pump
wiring chamber.
Secure 230 V cables with cable ties.
Note
Route LV leads and 230 V cables far
apart from each other.
3.
Route power cable for compressor
through the "400 V" opening to the
heat pump wiring chamber.
Always
secure power cables with
strain relief fittings.
Note
Additional strain relief fittings are
required on site, as the wall clearance
≥ 80 mm.
For power supply, see from
page 54.
Installation sequence
Routing cables to the heat pump wiring chamber
(cont.)
5848 246 GB
Installation
