Viessmann BM-190/238, Assembly Instructions Manual

Page: 3 / 36

Table of contents
VITOBLOC 200 BM-190/238
Assembly instructions 3
5780045
GB
1 Directives, norms ............................................................................. 4
1.1 Working at the block-type thermal power plant .......................................................... 4
1.2 General safety and installation instructions ............................................................... 4
1.3 MRL risk notice ............................................................................................................. 4
1.4 Remaining hazards with the use of the combined heat and power plant ................. 6
1.5 Important provisions, guidelines, norms and directives ............................................ 7
2 Specifications of a complete cogeneration module ...................... 9
2.1 Cogeneration module operating parameters .............................................................. 9
2.2 Specifications of the complete cogeneration module .............................................. 11
2.3 Dimensions, weights and finishes ............................................................................. 13
3 Transportation ................................................................................ 14
3.1 Unload by fork truck ................................................................................................... 14
3.2 Block-type thermal power plant storage conditions ............................................... 14
3.3 Cranage ....................................................................................................................... 15
3.4 Setting up .................................................................................................................... 16
3.5 Removing the transport securing devices ............................................................... 17
4 Installation ...................................................................................... 18
4.1 Qualification of personnel .......................................................................................... 18
4.2 Scope of delivery ........................................................................................................ 18
4.3 Requirements on the technical room ........................................................................ 19
4.4 Peripheral connections of the cogeneration module (flowchart) ............................ 20
4.5 Peripheral ventilation and exhaust ............................................................................ 21
4.6 Heating connection ..................................................................................................... 22
4.7 Gas connection ........................................................................................................... 23
4.8 Exhaust gas connection ............................................................................................. 24
4.9 Condensate drainage .................................................................................................. 25
4.10 Electrical connection .................................................................................................. 26
4.11 Installation of the noise cover (if part of the supply) ............................................... 27
5 Notification of readiness for start-up ............................................ 28
6 Declaration of conformity according to Machine Directive ......... 34