U S E R ‘ S M A N U A L |
V I R O L L E R | 22
When one selects a frequency cycle, one can modify neither the vibration time in-
terval nor the vibration frequency. In order to modify the vibration time interval or
return to a fixed vibration frequency, one must turn the central dial of the control
tower all the way towards the left.
S T A R T I N G T H E V I B R A T O R Y B A R
S T A R T / S T O P P H O T O E L E C T R I C S E N S O R
To start the vibratory bar, click on the green START button, situated at the top left
side of the control tower.
(Figure 11)
. The sliding platform should immediately start
up. If this is not the case, check that all connections are correct (see “connecting the
sliding platform to the control tower”).
The photoelectric sensor, located in the lower part on one of the sides of the control
tower, allows you to easily START and STOP the vibratory platform by simply moving
your foot close to the receptor area
(Figure 12).
To start and stop the vibratory platform move your foot to within 10 mm of the
receptor zone.
