U S E R ‘ S M A N U A L |
V I R O L L E R | 10
The greater length of the spiral cable which connects the vibratory bar with the con-
trol tower must be in contact with the ground. It is recommended to not separate
the control tower more than 2.0 m from the vibratory bar.
Do not step on the spiral cable.
Never touch the connection cables with wet hands.
Remove connection cables by pulling on the terminations and not the cable, as this
could result in damage.
Do not situate the control tower near sources of heat for prolonged periods of time
(heaters, hot are circuits…) and maintain ventilation displays unobstructed.
Do not place the
Viroller
in a humid environment. Do not allow liquid to enter the
equipment, especially the control tower. Keep the machine away from heat sources.
Viequipment takes no responsibility for damages caused by failure or interruption
of the grounding cable (ie. Electrical discharge).
Before conducting any exercise, make certain that the control tower is sufficiently
distant from the vibratory platform and that it poses no safety risk.
To avoid possible accidents during use, in no case should un-used accessories be
left near the vibratory bar.
When using the vibratory bar as a platform, placing the Viroller accessory upon its
central cylinder, it is recommended to wear clean, dry athletic shoes or heavy socks
(
Figure 4
).
