U S E R ‘ S M A N U A L |
V I R O L L E R | 19
version of the plate, followed thereafter by the visual of the three programmable
variables.
The parameters offered by the
Viroller
display are, on the left, the frequency of
vibration; in the center, the on/off cycles; and on the right, the vibration time
interval.
S E L E C T I O N O F T H E V I B R A T I O N F R E Q U E N C Y
The vibration frequency can be modified with the potentiometer on the lower left
part of the control tower.
A vibration frequency of 20, 25, 30, 35, 40, 45 or 50 Hz can be selected, turning
this dial from the left towards the right
(Figure 8)
.
