66250203-EN - V0.3 - 10/07/15
15
4000 Series Vandal Resistant Range
Art. 4212V-4212RV - Installation instructions
DEVICE
Device par. menu Parameter Name Programming method
Permission
Default value
1: RFID
RFID
By panel and PC software
Only Engineer
Disabled
2: Voice Chip
Voice Chip
By panel and PC software
Only Engineer
Disabled
3: Wiegand
Wiegand
By panel and PC software
Only Engineer
26 bit
Fob width
Only by PC software
Only Engineer
2 byte
RFID
Enables or disables the proximity access reader within the door panel.
Modify routine
• press
“1”
to enter into edit mode;
• press
“1”
to enable or disable;
• press to save or to exit edit mode without saving.
VOICE CHIP
Voice annunciation facility. It can be either
DISABLED
,
SINGLE
or
COMBINED
.
In
SINGLE
mode number called is pronounced singularly (i.e. 123 ... one, two three).
In
COMBINED
mode number called is pronounced all in one (i.e. 123 ... one hundred and twenty three).
Modify routine
• press
“2”
to enter into edit mode;
• press
“2”
to switch between
DISABLED
,
SINGLE
or
COMBINED;
• press to save or to exit edit mode without saving.
WIEGAND
This parameter specifies Wiegand protocol format. Wiegand 26 bit and 34 bit are supported.
Modify routine
• press
“3”
to enter into edit mode;
• press
“3”
to switch from 34 bit or 26 bit and viceversa;
• press to save or to exit edit mode without saving.
FOB WIDTH
This option specifies how much of the fobs internal code is used. It can be set to 2, 3 or four bytes.
This parameters can only e set using the PC software. When set to 2 bytes it will send the 2 least significant bytes of the fob, when
set to 3 will be the 3 least significant bytes and 4 will be the four least significant bytes.
Art. 4212V - 4212RV
Audio/video digital front panel
Programming
