66250203-EN - V0.3 - 10/07/15
19
4000 Series Vandal Resistant Range
Art. 4212V-4212RV - Installation instructions
Flush mounting door station installation
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
1. Embed the flush mounting box into the wall (160-170 cm between the top of the box and the floor level as shown in
Fig. 1
) pass-
ing the cables (
Fig. 2
) through a cable knockout hole in the box;
2. Make all the connections on the removable terminal blocks
(Fig. 2)
, then plug back into the panel
(Fig. 3),
setup the dip-switches
as per provided connection diagram or instruction sheet, then power up the system and check that it works correctly;
In order to prevent water ingress we highly recommend using a silicon sealant between the plate and the wall (Fig. 4);
3. Fix the plate to the flush mounting box using the screwdriver provided (torx end) and the pin machine torx screws (
Fig. 5
).
Do not over tighten the screws more than necessary.
