66250203-EN - V0.3 - 10/07/15
16
4000 Series Vandal Resistant Range
Art. 4212V-4212RV - Installation instructions
RESET AND TEST
RESTORE TO FACTORY PRESET
• Power off then power on the panel;
• when the display shows
“VX4212”
, keep the enter button pressed;
• the display will show
“RESET TO FACTORY SETTING”
.
TESTING CONNECTION
• insert Master code;
• press
“5”
and enter in System menu;
• press
“5”
and init the test. Now display will look like
Fig. 10
.
• the cental line describes the current test status; Flat, Ph. Id and Bl. Id specify which in-
tercom is under test. Panel makes a call to every item stored in memory: if it receives
the acknoledge from intercom status will be OK and after 2 seconds skips to test the
next intercom. If no ack is received then status reports Fail: it is kept for 10 seconds.
After that time routine continues on testing next intercom. User can stop routine by
pressing : test is paused. A further press of will end the routine. To resume test
press .
JUMPERS, SWITCHES AND CONNECTION TERMINALS
JUMPERS
Dry contact output
Capacitor discharge
SWITCHES
Balanced V1, V2
Coax V2=V, V1 not used
RS485 BUS TERMINATION
Open
Close
CONNECTION TERMINALS
12T
+12Vdc Camera power supply unit
GNDV
Camera power supply ground & video ground
on coax video system
V2/V
Balanced video signal sync- (V2) or coax video
signal (V). Refer to “SWITHCES” table on this page
V1
Balanced video signal Sync+
PTE
Push to exit button
TRD
Trade signal (from Art. 701T or other devices)
NO
Relay out - normally open contact
C
Relay out - common contact
NC
Relay out - normally close contact
SL
Accessory control signal
BS
“Busy system” signal
L
Bus connection - positive
−
Bus connection - negative
+12
Power supply - positive
OC OUTPUT
Open collector output
RS485 CONNECTION TERMINALS
A
RS-485 serial interface
B
GND
Ground
WIEGAND CONNECTION TERMINALS
D0
Data0
D1
Data1
LR
Red denied LED status output
LG
Green accept LED status output
TECHNICAL SPECIFICATION
Memory capacity:
998 users - 2800 keys - 2800 codes
Working voltage:
12 Vdc +/- 10%
Max absorb:
about 350mA
Working Temperature:
-10 +50 °C
stop
Testing...
Flat: 1
Ph. Id.
1
System-Test Connection
Fig. 10
Art. 4212V - 4212RV
Audio/video digital front panel
Programming
