66250203-EN - V0.3 - 10/07/15
12
4000 Series Vandal Resistant Range
Art. 4212V-4212RV - Installation instructions
CODE PARAMETERS
Code par. menu
Parameter Name
Programming method
Permission
Default value
1: Master
Master
By panel and PC software
Only Engineer
111111
2: Trade
Trade
By panel and PC software
Only Engineer
000000
3: Admin
Admin
By panel and PC software
Only Engineer
222222
4: Manage Trade Card
/
By panel and PC software
Only Engineer
/
MASTER
The master code must to between 3 to 6 digits and must also be different from the admin, trade and user codes. Entering the correct
master code will switch the panel in to programming mode with engineer permissions.
Modify routine
• press
“1”
to enter into edit mode;
• insert new code;
• press ;
• insert the same code to confirm;
• press to save or to delete characters or exit edit mode without saving.
TRADE
The trade code works within the trade time band and only when TRD is shorted to 0V.
It must be between 3 to 6 digits and different to all other codes. Entering the correct code when the above requirements are met
will open the door for the programmed time.
Modify routine
• press
“2”
to enter into edit mode;
• insert new code;
• press ;
• insert the same code to confirm;
• press to save or to delete characters or exit edit mode without saving.
ADMIN
The admin code will switch the door panel in the programming mode similar to the master code but with restricted permissions.
The code must to between 3 to 6 digits and different from all other codes.
Modify routine
• press
“3”
to enter into edit mode;
• insert new code;
• press ;
• insert the same code to confirm;
• press to save or to delete characters or exit edit mode without saving.
MANAGING TRADE CARD
Add, edit or delete proximity cards which can be used for trade purposes only during active timeband settings.
Add routine
• press
“4”
to enter into edit mode;
• press
“3”
to add and then present a card to the reader when asked;
• press to exit edit mode.
Art. 4212V - 4212RV
Audio/video digital front panel
Programming
