Videotec MAXIMUS MPXT, Instruction Manual

Page: 12 / 256

EN - English - I
nstruc
tion manual
10 MNVCMPXHDC_1916_EN
4 Identification
4.1 Product description and type
designation
The MAXIMUS MPX series is a range of
electropolished AISI316L steel PTZ cameras that can
be installed in potentially explosive environments.
The cameras in the MAXIMUS MPX range are
equipped with NPT or metric cables, depending on
the model.
The MAXIMUS MPX range has IP66/IP68/IP69
protection and can be installed in environments with
temperatures ranging from -40°C/+80°C (check the
labelling on each available product).
Versions are available with visible light camera,
thermal camera, or dual vision with visible light and
thermal camera.
4.2 Range of use
The unit is designed for use in a fixed location, for
surveillance of areas classified as zone 1-21 and zone
2-22 with potentially explosive atmospheres.
The unit has been built and certified in compliance
with directive 2014/34/UE and with the international
standards IECEX, which define its range of application
and minimum safety requirements.
4.3 Specific use conditions
Contact the manufacturer for information on the
dimensions of the explosion proof joint.
Ambient temperature and Surface temperature – see
instructions.
Care shall be taken to prevent accumulation of
electrostatic charges. See installation instructions.
The unit can be only installed in standard or inverted
position.
4.4 Gas Group, Dust Group and
Temperatures
The device is certified for the IIC group (Gas) and the
IIIC group (dust).
The temperature class, the maximum surface
temperature and the temperature of the cable entry
depend on the features of the installable devices
(Watt) and on the ambient temperature.
The features are specified for each model in its
specific chapters.
4.5 Characteristics of installable
devices
All the internal components must be installed inside
by the manufacturer.
4.6 Cable entry
The product is supplied with plastic caps for cable
entry protection. They cannot be used for installation.
Unused cable entries shall be closed off using
blanking devices Ex certified, as appropriate, with
protection type "db" and "tb" suitable for the
conditions of use and installed correctly..
All cable glands shall be Ex certified, as appropriate,
with protection type "db" and "tb", suitable for the
conditions of use and installed correctly.
When conduit is used, a suitable Ex certified stopping
box shall be used, as appropriate, with protection
type "db" and "tb", suitable for the conditions of use
and installed correctly.
The stopping box must be fitted within 50mm
(1.97in) from the enclosure entry.
The cable input temperatures are specified in the
marking.
To maintain the IP level of product use cable glands
with appropriate IP level and apply to threads a
sealant compliant with standard IEC/EN60079-14.