vidaXL 50762, Operating And Safety Instructions Manual, Page: 22 / 376

22 | 50762
later, set temperature on remote controller will change
quickly. After reaching to your required time, loosen the
button. Temperature indicator on indoor unit will also
change accordingly. (Temperature can't be adjusted under
auto mode)
• Under TIMER ON, TIMER OFF or Clock setting, you can press
"+"or "-" button to adjust time. (Refer to TIMER button for
details)
4. FAN button
See image 43
Auto AUTO Medium
Low High
Pressing this button can set fan speed circularly as: Auto, Low,
Medium, High.
5
Note
• Under AUTO Speed, IDU fan motor will adjust the fan speed
(high, medium or low speed) according to ambient
temperature.
• Fan speed under dry mode is low speed.
5. Button 5
Button 5
2-1
• Press this button to start or stop up and down swing
function. The remote controller defaults to simple swing
condition.
• Press + button and "Button 5" button at the same time at
unit OFF to switch between simple swing and static swing;
"Button 5" blinks for 2 seconds.
• In static swing condition, pressing "Button 5" the swing
angle of up and down louver changes is as shown.
See image 44
A No Display (horizontal louvers stops at current
position)
5
Note
• If the unit is turned off during swing operation, the louver
will stop at present position.
• When selecting "Button 5" with remote controller, it's auto
swing. Horizontal louver of air conditioner will swing up and
down automatically at the maximum angle.
• When selecting [2-1] with remote controller, it's the fixed
position swing.
• Horizontal louver of air conditioner will stop at that position
as shown by the icon to swing.
6. Button 6
Button 6
3-1
Swing angle is displayed
dynamically
• Press this button to start or stop left and right swing
function. The remote controller defaults to simple swing
condition.
• Press + button and "Button 6" at the same time at unit OFF
to switch between simple swing and static swing; "Button
6" blinks for 2 seconds.
• In static swing condition, pressing "Button 6" the swing
angle of left and right louver changes is as shown.
See image 45
B Swing angle is displayed dynamically
• If the unit is turned off during swing operation, the louver
will stop at present position.
• When selecting "Button 6" with remote controller, it's auto
swing. Horizontal louver of air conditioner will swing left
and right automatically at the maximum angle.
• When selecting [3-1] with remote cotroller, it' position
swing. Horizontal louver of air conditioner will stop at that
position as shown by the icon to swing.
• When selecting "swing angle is displayed dynamically", it's
the circulating swing. Horizontal louver of (swing angle is
displayed dynamically) air conditioner will swing circularly
according to the angle as shown by the icon.
5
Note: There is no this function for some units. If press this
key, the main unit will click, but it also runs under original
status.
7. Health/Save button
1) Health Function
After pressing HEALTH button, remote controller will switch
circularly as below: "HEALTH"→"AIR"→"AIR HEALTH"→"no
display".
– When selecting "HEALTH" by remote controller, HEALTH
function will be started up.
– When selecting "AIR" by remote controller, AIR function
will be started up.
– When selecting "AIR HEALTH", AIR and HEALTH function
will be started up.
– When there's no display on remote controller, AIR and
HEALTH function will be turned off.
– AIR function is applicable for some models.
– HEALTH function is applicable for some models.
2) Save Function
Under cool mode, press SAVE button and the unit will operate
under SAVE mode. Dual-8 nixie tube on remote controller
displays "SE". Air conditioner will operate at auto speed. Set
temperature can't be adjusted. Press SAVE button again to exit
SAVE mode. Air conditioner turn back to original set speed and
set temperature.
8. X-FAN button
After pressing this button under cooling or dry mode, remote
controller displays the character of "X-FAN" and X-FAN function
is started up. Press this button again to cancel X-FAN function.
The character of "X-FAN" will disappear.