vidaXL 50762, Operating And Safety Instructions Manual, Page: 17 / 376

17 EN___User manual |
other accidents.
5.1.1 Selection of Installation Location
1. Basic requirement
Installing the unit in the following places may cause malfunction.
If it is unavoidable, please consult with the local dealer:
• The place with strong heat sources, vapors, flammable or
explosive gas, or volatile objects spread in the air.
• The place with high-frequency devices (such as welding
machine, medical equipment).
• The place near coast area.
• The place with oil or fumes in the air.
• The place with sulfureted gas.
• Other places with special circumstances.
2. Requirement of air conditioner
• Air inlet should be far away from obstacles and do not put
any objects near air outlet. Otherwise, it will affect the
radiation of heat discharge pipe.
• Select a location where the noise and outflow air emitted
by the outdoor unit will not affect neighborhood.
• Please try your best to keep far away from fluorescent
lamp.
• The appliance shall not be installed in the laundry.
5.1.2 Requirements for electric connection
1. Safety precaution
• Must follow the electric safety regulations when installing
the unit.
• According to the local safety regulations, use qualified
power supply circuit.
• For appliances with type Y attachment, the instructions
shall contain the substance of the following. If the supply
cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to
avoid a hazard.
• Properly connect the live wire, neutral wire and grounding
wire of power socket.
• Be sure to cut off the power supply before proceeding any
work related to electricity and safety.
• Do not put through the power before finishing installation.
• The air conditioner is first class electric appliance. It must
be properly grounding with specialized grounding device by
a professional. Please make sure it is always grounded
effectively, otherwise it may cause electric shock.
• The yellow-green wire or green wire in air conditioner is
grounding wire, which can't be used for other purposes.
• The grounding resistance should comply with national
electric safety regulations.
• The appliance shall be installed in accordance with national
wiring regulations.
5.2 Preparation before installation
5
Note: check if the accessories are available before
installation.
1. Accessory list
See image 5-1
1 Joint A 8 Pipe clip
2 Joint B 9 Rubber Plug
3 Joint C 10 Pipe Hoop
4 Heat Discharge Pipe 11 Drainage Pipe
5 Adapter 12 Remote controller
6 Wire hook 13 Battery (AAA 1.5V)
7 Screw 14 User's Manual
2. Optional accessories
5
Note: some models are without the following accessories.
See image 5-2
15 Support 21 Window Frame
16 Rain Shield 22 Sponge A
17 Protective Grille 23 Sponge B
18 Screw 24 Window Fastener
19 Nut 25 Spring washer
20 Bolt 26 Washer
3. Tools needed for installation
See image 5-3
27 Cross screwdriver 30 Gauge
28 Straight Screwdriver 31 Scissors
29 Saw 32 Pencil
5.3 Install Wire Hook
• Assemble the wire hook at back of the unit with screws (the
direction of wire Hook is as shown in image 6-1).
A Direction of wire hook is upward C Wire hook
B Direction of wire hook is downward D Screw
• Wind the power cord around the wire hook.
See image 6-2
5.4 Removing Collected Water
There are 2 ways to remove collected water.
1. Use the continuous drainage option from the bottom hole.
5
Note: When using the continuous drainage option from
the bottom hole, install drainage pipe before using, otherwise
poor drainage will affect normal operation of the unit.
• Instructions for drainage pipe installation as follows.
See image 7
A Drainage Port D Rubber Plug
B Drainage Pipe Clip E Pipe Hoop
C Screw F Drainage Pipe
1) Remove the rubber plug at drainage port.