vidaXL 50762, Operating And Safety Instructions Manual, Page: 19 / 376

19 EN___User manual |
2) If the inner width of the window is between 20.5" (520mm)
and 37.4" (950mm) inclusive.
See image 19
a) Open the window sash and place the window panel on
the window stool.
b) Slide the adjustment panel to fit the window stool
width.
c) Secure the window panel to the window stool with
screws.
3) If the inner width of the window is between 37.4" (950mm)
and 56.7" (1440mm) inclusive.
See image 20
21 Extension panel
a) Attach the extension panel to the adjustment panel.
b) Open the window sash and place the window panel on
the window stool.
c) Slide the adjustment and extension panels to fit the
window stool width.
d) Secure the window panel to the window stool with
screws.
8. Cut the Sponge B to a proper length and attach it to the
window panel.
See image 21
9. Close the window sash securely against the Window panel.
See image 22
10. Cut the sponge A to a proper length and seal the gap
between upper part of inner window sash and outer
window sash.
11. Fix the inner window with window bracket and screw, so
that it can not slide vertically.
See image 23
22 Sponge A 26 Wooden window
23 Outer window 27 Window sash
24 Inner window 28 Window bracket
25 Plastic window
5.6 Installation in a sliding sash window
1. Install rear clip - aim the rear clip(upper) at the rear
clip(lower), fix them together, press the clasp forcibly in to
the groove.
See image 12
2. Clamp joint B+C into the inner side of window panel along
the direction of arrow.
See image 13
3. Fix the protective grille on joint B+C with screws.
See image 14
4. Fix the support on the outer side of window panel with
nuts, spring washer, washer and bolt.
See image 24
5. Fix the rain shield on the support with nuts, spring washer,
washer and bolt.
See image 25
5
Note: protective grille, support, rain shield, nut, bolt,
spring washer and washer are optional accessories; some
models are without these accessories.
6. Cut the sponge B to a proper length and attach it to the
window stool.
See image 26
7. Install the window panel into the window stool.
1) If the height of the window is less than 20.5" (520mm).
The window panel cannot be installed in windows less than
20.5" (520mm) high.
See image 27
a) Remove the adjustment panel from the window panel,
and cut the window panel to the same width as the
window.
b) Open the window sash and place the window panel on
the window stool.
c) Secure the window panel to the window stool with
screws.
2) If the inner width of the window is between 20.5" (520mm)
and 37.4" (950mm) inclusive.
See image 28
a) Open the window sash and place the window panel on
the window stool.
b) Slide the adjustment panel to fit the window stool
height.
c) Secure the window panel to the window stool with
screws.
3) If the inner width of the window is between 37.4" (950mm)
and 56.7" (1440mm) inclusive.
See image 29
a) Attach the extension panel to the adjustment panel.
b) Open the window sash and place the window panel on
the window stool.
c) Slide the adjustment and extension panels to fit the
window stool height.
d) Secure the window panel to the window stool with
screws.
8. Cut the Sponge B to a proper length and attach it to the
window panel.
See image 30
9. Close the window securely against the window panel.
See image 31
10. Cut the sponge A to a proper length and seal the gap
between left side of inner window sash and outer window
sash.
11. Fix the inner window with window bracket and screw, so
that it can not slide vertically.
See image 32