64
Maintenance
Rear Suspension Adjustment
For riding comfort and to ensure proper ground
clearance, adjust rear shock air pressure as specified on
the label located in the right saddlebag cover (reproduced
below).
Follow these guidelines when adjusting:
• Park the motorcycle with the sidestand down on a
firm, level surface. Remove all riders and cargo.
• DO NOT exceed 72 PSI (496 kPa) in the shock.
• Use the VICTORY Air Pump and Gauge (P/N
2876654). Follow the instructions on the following
pages.
If the VICTORY air pump and gauge are not available, use the gauge provided in the tool kit,
and a pressurized air source with a maximum line pressure of 72 PSI (496 kPa). After using
this gauge, remove it quickly to minimize leakage. Expect to lose about 4 PSI (27.6 kPa)
with each pressure check when using this gauge.
Use only a dry air source
, such as a system
with a water separator or air line dryer, to prevent moisture from entering the shock.
CAUTION!
Air pressure increases VERY quickly when using pressurized air. Wear eye and face
protection
.
Air Suspension Adjustment
(Shock Label)
Set desired pressure with bike unloaded on side stand
Total Cargo
& Occupant
Weight (lbs)
Air Pressure (psi) - MAX 72 PSI
No Trunk
Trunk
ABS-Tour
Low
(MAGNUM)
100
0
0
0
26
125
0
0
0
30
150
0
0
9
35
175
0
9
15
38
200
0
15
25
42
225
9
25
29
46
250
15
29
34
49
275
25
34
39
52
300
29
39
45
57
325
34
45
52
63
350
39
52
58
65
375
45
58
65
68
400
52
65
70
72
425
58
70
72
450
65
72
72
475
70
72
72
500
72
72
72
Shock Label
