125
Cross Country/Cross Country Tour Audio System
NAV MP3
Navigation MP3 Introduction
Please read this manual and the GARMIN
ZUMO 660 NAV MP3 information pro-
vided with your player to become familiar
with all unit features and operation.
The audio integration kit must be installed
to enable outputs from the NAV MP3 (such
as navigation instructions or user-loaded
MP3 media files) to play through the head-
sets or speakers. The unit is fully functional
without the kit installed, but there will be no
interface with the vehicle’s audio system.
Navigation MP3 Operation Tips
• Signals coming from the NAV MP3 unit will
override any source of the motorcycle’s audio
system to ensure navigation instructions are
communicated when needed. The signals will
also override the MP3 player.
• You must set volume levels within the NAV
MP3 unit. Volume settings in the motorcycle’s
audio system control NAV MP3 volume, but
navigation instructions may be difficult to hear
if volume levels in the unit are set too low. See
the GARMIN information for setting
procedures. The recommended initial settings
are 100/80/80: MASTER 100%, NAVIGATION
80%, MEDIA 80%.
• Pause or stop the MP3 player to switch to
radio.
• To switch from radio to MP3 player, change
the active source to AUX. For best sound
quality, change the AUX mode setting on the
radio from AUX to NAV MP3 when listening to
the MP3 player. Audio works in the AUX
setting, but the levels are not optimized.
• If playing MP3 files from the GARMIN ZUMO
660 unit, you may need to turn down the
“media volume” on the GARMIN unit to avoid
distortion.
Changing to NAV MP3 Mode
The ignition key must be in the ACC or ON
position to use the audio system.
Press VOL (+) to turn the audio system on.
Press and release the MODE button until
AUX is the active source.
To change the mode, press the MODE button
repeatedly to toggle to the AUX mode.
Press TUNE (+) or TUNE (-) to set the
mode to AUX (for iPod or any other MP3
player use) or to NAV MP3 for navigation
unit MP3 player use.
AUX
ICOM
CB19
AUX
