42
Operation
The operation section of this manual describes how to ensure maximum performance and
longevity through the proper care and operation of your motorcycle.
Tip:
Even if you're an experienced motorcycle operator or passenger, read all of the safety information
in this manual before operating the motorcycle. See page 7.
Important areas covered by the operation section include:
• Engine Break-In
• Fueling
• Starting the Engine
• Shifting Gears
• Accelerating
• Using Cruise Control (if equipped)
• Braking
• Stopping the Engine
• Parking
Engine Break-In
The engine break-in period for your motorcycle is the first 500 miles (800 km) of operation.
During this break-in period, critical engine parts require special wear-in procedures so they
seat and mate properly. Read, understand and follow all break-in procedures to ensure the
long-term performance and durability of your engine.
NOTICE:
Failure to properly follow the engine break-in procedures outlined in this manual can result
in serious damage to the engine. Follow all break-in procedures carefully. Avoid full throttle
operation and other conditions that may place an excessive load on the engine during the
break-in period.
Odometer
Break-in Procedure
Miles
Km
0-90
0-145
Do not operate for extended periods above 1/3 throttle or at any one throttle
position. Vary engine speed frequently.
91-300
146-483 Do not operate for extended periods above 1/2 throttle or at any one throttle
position. Vary engine speed frequently.
301-500
484-800 Do not operate for extended periods above 3/4 throttle.
At
500
At
800
Perform the break-in maintenance outlined in the maintenance section of this
manual. Break-in maintenance should be performed by an authorized VIC-
TORY dealer. Break-in maintenance must include inspection, adjustments, fas-
tener tightening and an engine oil and filter change. Performing break-in
maintenance at the required odometer reading helps ensure peak engine per-
formance, minimal exhaust emissions and maximum service life of the engine.
