6.
Continue to hold the pump above the
hydraulic power cylinder and close the fill plug .
7.
Replace the pump and table assembly
securely to the side of the tool .
PARTS ORDERING
INFORMATION
When ordering parts, the following information is
necessary for Victaulic to process the order and
send the correct part(s) . Request RP-416FS/
FSD for detail drawings and parts listing .
(1)
Tool Model Number . VE416FS or VE416FSD .
(2)
Tool Serial Number . The serial number can
be found on the side of the tool head .
(3)
(Quantity), Part Number and Description .
For example: (1) Part #R-105-416-VEO,
Upper
Shaft .
(4)
Where to send the part (s):
Company
name
Address
(5)
To whose attention to send the part(s) .
Person’s
name
(6)
Purchase Order Number
Order parts from the nearest Victaulic sales
office . Consult the back page of this Instruction
Manual for the nearest Victaulic sales office .
ACCESSORIES
VICTAULIC ADJUSTABLE PIPE STANDS
Victaulic Model 112, a portable, adjustable,
roller type, four-leg pipe stand for use with
Series VE416 and other Victaulic roll grooving
tools, is available from Victaulic . Ball transfer
rollers, adjustable for pipe from 3/4 - 12”, will
accommodate linear and rotational movement .
Turnstile design permits easy swivel for grooving
both pipe ends . Contact Victaulic for details .
Also available is Victaulic Model 224 . It has
features similar to Model 112 . It is suitable for
pipe sizes from 2 - 24” . Consult Victaulic for
details .
POWER DRIVE
The Victaulic VPD752 is available for use with
VE416FS and other tools . Consult Victaulic for
details .
OPTIONAL ROLLS
See Tool Rating and Roll Selection chart on
pages 29 and 30 for rolls for different materials
and groove specifications .
TM-VE416FS/FSD_26
TM-VE416FS/FSD
OPERATING AND MAINTENANCE INSTRUCTIONS MANUAL
www.victaulic.com
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY.
REV_A
