11
VE414
6.
Set the main power switch to the “ON”
position and flip toggle switch to “Jog”. It is
located on the left-hand side of the enclosure.
7.
With operator on the switch side of the
machine, use the safety foot switch to energize
the tool motor, bringing the upper roll down
into firm contact with pipe. Withdraw foot from
safety foot switch.
Grooving rolls can crush or cut
fingers and hands.
• Loading and unloading pipe
will place your hands close to
the rollers.
• Never groove pipe shorter
than what is recommended in
Table 1 on page 9.
8.
Remove the guard setting pad from its stor-
age hook. Hold the guard setting pad firmly
down against the pipe and push it under the
adjustable guards flush against the red plate.
9.
Loosen the wing nuts and adjust each
guard to conform to and lightly pinch the pad
against the pipe. Tighten wing nuts to secure
guards in position.
10.
Remove the guard setting pad. Store the
pad back on the hook provided.
11.
Prepare to support pipe and flip toggle
switch to “Normal Operation”. Arm/upper roll
assembly will return to its upper position and
pipe will release.
