3
VE414
OPERATOR SAFETY INSTRUCTIONS
This tool is designed only for roll grooving pipe. To accomplish this function requires some dexterity
and mechanical skills, as well as sound safety habits. Although this tool is manufactured for safe
dependable operation, it is impossible to anticipate those combinations of circumstances which
could result in an accident. The following instructions are recommended for safe operation of the
tool. The operator is cautioned to always practice "Safety First" during each phase of use, including
setup and maintenance of this unit.
It is the responsibility of the owner, lessee or user of
this tool to ensure that all operators receive, read and understand this manual and are
fully trained to operate this tool.
GENERAL
1.
Read and understand this Manual before operating or performing maintenance on this tool.
Become familiar with the tool’s operations, applications and limitations. Be particularly aware of its
specific hazards. Store this manual in a clean area and always at a readily available location. Additional
copies at no charge are available upon request by writing or phoning the Victaulic Tool Company.
2.
Use only recommended accessories.
Use of improper accessories may be hazardous. See Accessories
on page 29.
3.
This tool is designed ONLY for roll grooving of pipe sizes, materials and wall thicknesses
outlined under Tool Rating and Roll Selection, pages 33 and 34.
TOOL SETUP
1.
Ground the drive motor.
Be sure the drive motor is connected to an internally grounded electrical
system.
2.
Avoid dangerous environments.
Don't use the machine in damp or wet locations. Don't use the tool
on sloped or uneven ground or floor. Keep work area well illuminated. Allow sufficient space to operate tool
and accessories properly and for others to pass safely.
3.
Prevent back injury.
During tool setup, a lift must be used to handle and position tool.
OPERATING TOOL
1.
Inspect the equipment.
Prior to starting the tool, check the movable parts for any obstructions. Be sure
that guards and tool parts are properly installed and adjusted.
2.
Prevent accidental startings.
Place power switch in the “OFF” position prior to connecting electrical
power.
3.
Operate tool from control station side only.
The tool must be operated with the safety foot switch
control located for easy operator access. Never reach across moving parts or material being worked on.
Foot switch should always be accessible to operator.
4.
Keep hands away from grooving rolls and stabilizer wheel during grooving operation.
Grooving rolls can crush or cut fingers and hands.
5.
Never reach inside pipe ends during operation.
6.
Do not over-reach.
Keep your proper footing and balance at all times. Be sure you can reach foot switch
safely at all times. Do not reach across tool or pipe. Keep hands and loose tools away from moving parts.
7.
Wear safety glasses and footwear.
8.
Keep work area clean.
Cluttered areas, benches and slippery floors invite accidents.
9.
Wear ear protection if exposed to long periods of very noisy shop operations.
10.
Keep visitors away.
All visitors should be kept a safe distance from the work area.
11.
Keep alert.
Do not operate tool if ill or drowsy from medication or fatigue. Avoid horseplay around tool
and keep bystanders a safe distance from tool and pipe being grooved.
12.
Wear proper apparel.
Never wear loose clothing (unbuttoned jackets or loose sleeve cuffs) loose gloves
or jewelry that can get caught in moving parts.
13.
Do not force tool.
It will do the job better and safer at the rate for which it was designed.
14.
Secure work, machine and accessories.
Make sure machine is stable. See “Tool Setup” for securing
machine to floor or platform.
15.
Support work.
Support long pipe with a pipe stand secured to the floor or ground.
16.
Do not misuse tool.
Perform only the functions for which the tool is designed. Do not overload the tool.
TOOL MAINTENANCE
1.
Disconnect electrical power prior to servicing.
Repair should be attempted only by authorized
personnel. Always disconnect power before servicing or making adjustments.
2.
Maintain tool in top condition.
Keep tool clean for best and safest performance. Follow lubricating
instructions.
3.
Use only genuine Victaulic replacement parts to ensure proper and safe function of the tool.
