Victaulic VE414 Operating And Maintenance Instruction Manual Download

Page: 28 / 40

VE414

RECOMMENDED LUBRICANTS

BEARING AND SLIDE GREASE

General Purpose E.P. Lithium Base Grease

MANUFACTURER

PRODUCT

• Amoco Oil . . . . . . . . . . . Amolith Grease #2EP

• Arco Petroleum Prod. Co.. . . . Litholine HEP 2

• Ashland Oil, Inc./Valvoline Oil Co.

. . . . . . . . . . . . . . . Multi-Lube Lith. EP Grease

• Exxon Co., USA . . . . . . . . . . . . . . . Lidok EP 2

• Gulf Oil Corp. . . . . . . Gulfcrown Grease EP#2

• Kendall Refining Co. . . . . . . . . . . . . . . . . L-426

• Lubriplate . . . . . . . . . . . . . . . . . . . . . No. 630-2

• Mobil Oil Corp. . . . . . . . . . . . . . . Mobilux EP2

• Pennzoil Prod. Co.. . . . . Pennlith EP 712 Lube

• Shell Oil Co.. . . . . . . . . . . . . . . . . .Alvania EP2

• Sun Refining . . . . . . . . . . Sun Prestige 742 EP

• Texaco Inc. . . . . . . . . . . . . . . . . . Multifak EP2

GEAR OIL

See tag on Gear Reducer.

HYDRAULIC OIL

High Pressure Anti-Wear
Hydraulic Oil ISO Grade 32

MANUFACTURER PRODUCT

• Amoco Oil . . . . . . . . . . . . . . . . . Rykon Oil #32

• Arco Petroleum Products Co. . . . Duro AW 32

• Ashland Oil, Inc./Valvoline Oil Co.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . AW Oil #15

• Exxon Co., USA . . . . . . . . . . . . . . . Nuto H 32

• Gulf Oil Corp. . . . . . . . . . . . . Harmony 32 AW

• Kendall Refining Co. . . . . . Kenoil R&O AW-32

• Lubriplate . . . . . . . . . . . . . . . . . . . . . . . . HO-O

• Mobil Oil Corp. . . . . . . . . . . . . . Mobil DTE 24

• Pennzoil Products Co.

. . . . . . . . . . . . AW 32 Hyd. Oil/Penreco Oil 32

• Shell Oil Co.. . . . . . . . . . . . . . . . . . . . .Tellus 32

• Sun Refining . . . . . . . . . . . Survis 706, 816 WR

• Texaco Inc. . . . . . . . . . . . . . . Rando Oil HD 32

PARTS ORDERING
INFORMATION

When ordering parts, the following information
is necessary for the Victaulic Tool Company to
process the order promptly and send the cor-
rect part(s):

(1)

Tool Model Number. VE414.

(2)

Tool Serial Number. The serial number can

be found on the side of the tool name plate.

(3)

(Quantity), Item Number, Part Number and

Description. Example: (1) #R-001-414-MCH,
Main Shaft.

(4)

Where to send the part (s):

Company name
Address

(5)

To whose attention to send the part(s).

Person’s name

(6)

Purchase Order Number

(7)

Billing Address

Order parts from the nearest Victaulic sales
office. Consult the back page of this Instruction
Manual for the nearest Victaulic sales office.

Summary of Contents for VE414









































Search results

Summary of Contents for VE414

Reviews:

Related manuals for VE414

Brands by name

Popular brands

Victaulic VE414, Operating And Maintenance Instruction Manual

Search results

Summary of Contents for VE414

Reviews:

Related manuals for VE414

Brands by name

Popular brands